Construction Technology 5.01

A hand tool used to mark a very long straight line is a:
1. Chalk line.
2. Level.
3. Plumb bob.
4. Square.
What is used to plumb walls as they are erected?
1. Chalk line
2. Framing square
3. Hammer
4. Level
What saw is used to cut curves and to cut trim molding?
1. Back
2. Back
3. Back
4. Rip
A standard folding wood rule is how many feet long?
1. 4 and 6
2. 6 and 8
3. 8 and 10
4. 10 and 12
The blade of a carpenter’s square is 24" long. How many inches long is the tongue (other leg)?
1. 10
2. 12
3. 16
4. 20
In addition to a slotted screwdriver, what other screwdriver do carpenters frequently use?
1. Clutch-head
2. Phillip’s-head
3. Square-head
4. Torx-head
A type of adjustable square that can be used to set, test, and transfer angles is a:
1. Miter.
2. Sliding T-bevel.
3. Speed.
4. Try.
What wrench is shown below?
1. Adjustable
2. Box end
3. Combination
4. Open end
What tool is shown below?
1. Bar clamp
2. C-clamp
3. Pipe clamp
4. Vise
What hand tool is shown below?
1. Combination square
2. Framing square
3. Steel rule
4. Tape measure
Which pliers are used to cut, twist, and hold wire?
1. Diagonal cutting
2. Lineman
3. Long nose
4. Slip joint
What is used to cut metal pipe?
1. Drywall knife
2. Hacksaw
3. Handsaw
4. Keyhole saw