Construction Technology 7.02

What length is indicated at A on the ruler above?
1. 0.5"
2. 1.25"
3. 1-5/8"
4. 1.75"
What length is indicated at B on the ruler above?
1. 0.75"
2. 13/16"
3. 7/8"
4. 1-7/8"
What length is indicated at C on the ruler above?
1. 1-7/8"
2. 1-3/4"
3. 1-11/16"
4. 1-1/8"
What length is indicated at D on the ruler above?
1. 3-13/16"
2. 2-1/4"
3. 2-3/16"
4. 2-3/16"
What is the length between A and C on the ruler above?
1. 1/2"
2. 3/4"
3. 1-1/4"
4. 1-3/4"
What is the length between B and D on the ruler above?
1. 1-1/4"
2. 1-5/16"
3. 1-1/2"
4. 1-11/16"
How many 20-gallon containers are needed to hold 100 gallons?
1. 5
2. 6
3. 10
4. 20
Two 3' lengths are made out of a board 8' long. How many feet will remain as scrap?
1. 0.66
2. 2
3. 3
4. 5
A plumbing job requires 450 feet of plastic pipe available in 20' sections. How many sections are needed?
1. 20
2. 23
3. 26
4. 29
A carpenter is to build 3 built-up headers. One is 41-1/2" long, the second is 29-1/2" long, and the third is 37-1/2" long. What is the total length of header material required?
1. 10 '
2. 15'
3. 19'
4. 21'
The fraction 1/4 is equal to:
1. 2/16.
2. 4/16.
3. 6/16.
4. 8/16.
The fraction 3/8 is equal to:
1. 4/16.
2. 6/16.
3. 8/16.
4. 10/16.
The fraction 3/4 is equal to:
1. 10/16.
2. 12/16.
3. 14/16.
4. 16/16.
One inch is equal to:
1. 2/8.
2. 4/8.
3. 6/8.
4. 8/8.
One inch is equal to:
1. 4/16.
2. 8/16.
3. 12/16.
4. 16/16.
One and one-fourth inches are equal to:
1. 12/16.
2. 16/16.
3. 20/16.
4. 24/16.
One and one-half inches are equal to:
1. 18/16.
2. 20/16.
3. 22/16.
4. 24/16.
One and one-fourth inches are equal to:
1. 2/4.
2. 3/4.
3. 4/4.
4. 5/4.
One and one-half inches are equal to:
1. 10/8.
2. 12/8.
3. 14/8.
4. 16/8.
One and one-half inches are equal to:
1. 4/4.
2. 6/4.
3. 8/4.
4. 10/4.
One inch is equal to:
1. 2/2.
2. 4/2.
3. 6/2.
4. 8/2.

Construction Technology 7.02

Quiz