Construction Technology II

The finished wood that is placed in the rough door opening is called the:
1. Arched opening.
2. Door jamb.
3. Kick plate.
4. Door stop.
The top horizontal frame member of a door frame is the:
1. Header.
2. Head jamb.
3. Stile.
4. Trimmer.
The framework around the glass in a window is the:
1. Bay.
2. Header.
3. Molding.
4. Sash.
A self-flashing skylight is called self-flashing because it:
1. Comes with a roll of aluminum tape.
2. Comes with a roof curb.
3. Has a built-in metal flange.
4. Reflects sunlight.
A 2 x 4 wall that has 1/2" sheathing on the exterior and 1/2" gypsum on the interior would require a door jamb of what width?
1. 4"
2. 4-1/2"
3. 5"
4. 5-1/2"
Extension jambs are MOST likely to be needed when:
1. A modern replacement window is installed in an older building.
2. Casement windows are used.
3. The new window is not as wide as the old window.
4. The window is too high.
A wood or metal piece used to close the gap between the entry floor or sill and the door is a:
1. Lockset.
2. Shim.
3. Template.
4. Threshold.
A door is a left-hand door when facing the door and opening it by:
1. Pulling to open and the knob is on the left.
2. Pulling to open and the knob is on the right.
3. Pushing to open and the knob is on the left.
4. Pushing to open and the hinge is on the right.
The swing of a door may be determined by standing on the side of the door hinge pins, and if the hinge pins are to the left, then the door is a:
1. Double-hand door.
2. Left-hand door.
3. Right-hand door.
4. Single-hand door.
A pre-hung door comes equipped with the frame, threshold, and exterior:
1. Casing.
2. Fascia.
3. Header.
4. Jamb.
The width of a rough opening for a 3-0 x 6-8 door is how many inches wide?
1. 38
2. 38-1/2
3. 42
4. 42-1/2

Construction Technology II - 8.03

Quiz