Construction Technology II

To install a pre-hung window, the sash should be:
1. Open.
2. Removed.
3. Shimmed.
4. Shut.
Blocks used to protect the window during shipping should be:
1. Checked for square.
2. Reattached.
3. Removed.
4. Used for shims.
What should be leveled FIRST after a window is placed in a rough opening?
1. Head
2. Left side
3. Right side
4. Sill
To install a pre-hung window, it should be placed in the rough opening:
1. Centered between the rough sill and the rough header.
2. 1/4" – 1/2" below the rough header.
3. Sitting on the rough sill.
4. Tight against the rough header.
Always make sure a window is plumb, level, and:
1. Diagonal.
2. Square.
3. Tight.
4. Vertical.
Vinyl and metal windows, as well as wood clad windows, are equipped with nailing flanges or:
1. Brackets.
2. Fins.
3. Hangers.
4. Holes.
Before windows are installed, the protective shipping blocks should be:
1. Checked for square.
2. Reattached.
3. Removed.
4. Used for shims.
The FIRST part of a window to be checked for level after installation is the:
1. Head.
2. Left side.
3. Right side.
4. Sill.

Construction Technology II - 8.04